Fil-Tec cleaning tools

1. Lances for cleaning with compressed air 

Type: FT1MS

Cleaning lance for connection to the compressed air supply with a hose (I.D. 10 mm / 6 bar), the FTMS cleaning lance is used for the air-cleaning of installed mantle elements. The dirt particles that have collected on the outside of the mantle element are blown off by compressed air from the clean side out.

2. Spray gun for cleaning wire mesh screw-in or plug-in candles 

Type FT5.01

Cleaning lance for connection to the compressed air supply with a hose (I.D. 10 mm / 6 bar), the FT5.02 cleaning lance is used for the air-cleaning of wire mesh screw-in or plug-in candles. The dirt particles that have collected on the outside of the candles are blown off by compressed air from the clean side out.

3. Lance with rotating nozzle for the cleaning of wire mesh screw-in or plug-in candles 

Type: FT2

Cleaning lance FT2 with rotating nozzle for rinsing out wire mesh plug-in or screw-in candles. The lance is inserted into the candle and the open end is sealed depending on the type (I = plug-in candle, II = screw-in candle). Through the combined action of the rotating nozzle and the water pressure (high-pressure cleaner), the dirt particles are washed out of the candle mesh from the clean side (inside) out.

4. Cleaning lance with fan nozzle 

FT2FS

Cleaning lance FT2FS with fan nozzle for washing filter elements, such as basket elements, ring elements and pleated elements.